Optical Distribution Frame

The key to a successfully managed transmission network lies in the choice of the right fiber optic distribution system. This solution provides flexible cabling access, expandable frame concept, integrated cable management and a future proof modular design with the highest termination capacity possible and superior cable management. High density side access type of module is also designed to fit a variety of termination, splice, and storage applications

Integrity in exceeding industry standards and providing a strong network foundation

Protection against damage from handling and harsh natural environments

Access for ease of use and service efficiency in the field

Investment in modular system design for flexibility and growth

Standard 19”& ETSI installations

Designed to be used together with high density side access type modules

Maximum fiber density of 2016 ports (splice &patch) and superior cable management

Special cable glands to fix the maximum number of bundle cables on the ground

Slot type cable guide compartments to feed the modules via mini flex tubes

Wide range of splice, patch and cable storage options

Interchangeable cassettes for various cable/tube counts and connector styles

Accepts WDM and splitter cassettes

Integral patch cord management

Wall mount fiber optic termination

The Wall Mount Panel has been optimized for both indoor and outdoor deployments. The OSP platform is designed for the harshest environment, supporting NEMA 4 performance requirements, yet allows for conduit entry through field-deployed knock-outs on both the rear and bottom of the unit. The design allows field personnel to reduce installation time without jeopardizing immediate or long-term reliability

This Panel is ideal for both business-class and residential environments. It is ring-cut or mid-span capable, allowing for the distribution cables to be daisy-chained and for fiber hand-off through the riser. Both versions provide a swinging bulkhead for rear-access to the cassettes and protect sub-unit slack storage

Designed from conception to provide fast, easy fiber jumper routing and ease of access to all circuits, the Wall Mount Panel system is craft-friendly, keeping the installer’s needs for quick deployment, intuitive use and ease of maintenance as our top priority

With the Clear view Cassette at its heart, the Wall Mount Panel gives service providers plug and play integration based upon the configuration requirements of the application. With a choice of up to 48 ports for the outdoor model or up to 144 ports for the indoor model, users can easily scale their networks using the same consistent Clear view Cassette deployment strategy

Ideal for Small-Count Scenarios

The Small Count Delivery (SCD) Wall Box is ideal for any small-count “landed” fiber scenarios where 2, 4, 6, 12, or 24 fibers are required in a discrete footprint without sacrificing fiber management. Engineered to land small port count fiber terminations and optical components as conveniently as possible, the Clear view xPAK, Clear view Cassette, and SCD Wall Box enclosure are packaged to be more cost-effective and efficient than previously thought possible. The plastic, lockable, NEMA 4 rated enclosure is ideal for a variety of applications, including harsh environment locations and is suited for in-building needs

Splice cassettes

Splice Cassettes, often called organizers or splice trays, are designed to house and protect your splice protectors and manage the incoming and outgoing fibers. They are generally used in all wall and rack mount fiber enclosures

Cable ties are used to attach the fiber tubes to the cassette and excess fiber is stored within the cassette (which is marked on the base with a reminder to check minimum bend radii of the fibers)

Fusion splices are held in splice protector sleeves that fit into the splice organizer; each organizer holds 6 /12 fibers and each cassette holds 2 organizers – 12/24 fibers per cassette

Outdoor Fiber Distribution Hub – Cabinet

Description
Advanced fiber optic networks using Point-to-Point or Point-to-Multipoint architectures requires high density fiber distribution points to supply FFTX services to the customers. High-quality fiber optic
connectivity relies on the increased protection offered by weatherproof outdoor cabinets.

This Fiber Distribution Hub (FDH) combines unique features in a compact cabinet. The FDH handles in-cabinet splicing of cable as well as incremental installation of air blown micro cable or air blown fiber. The FDH is designed for both PON and P2P FTTx connections and is designed for the RDJ 901+ splitter module…

Optional: Mounting brackets for wall applications

C-rail for fixing the cables on the back side

Max. module capacity

Easy installation and removal

Suitable for different cable diameters

Provides a secure anchor for incoming loose tube cables within the cabinet

Weather-proof outdoor cabinet for installation of optical distribution modules

Assembly of modular optical building blocks like splice, patch and splitter modules

Doors are protected from external access through hidden hinges

FIBER OPTICAL SPLICE CLOSURE

Description

The Fiber Optical Splices Closures protects fiber optical splicing point in various installation conditions such as aerial, duct and buried. It is specially designed for FTTx network and applicable to multi branching installation by using Mid-plate which is for increasing core capacity and complying with the requirements in each point of network.

Features

Closure provides perfect solution for the protection of the junction point of optical fiber cable from environment.

Silicone gasket is used to seal closure and provide a long term reliability

Closures have two or three cable entrance ports on each end

Closures can be installed at temperature between -40℃~80℃

Closures are compact and lightweight

Its installation is very easy due to applied minimum bolt

Application

Fiber optic telecommunication networks system

Fiber optic subscriber networks system

Fiber optic CATV(HFC) networks system

Vault and building environments system

Rack mounted fiber optic patch panel

Sliding type rack mounted fiber optic patch panel is designed for fiber connection and distribution of backbone fiber cable; it is suitable for fiber splicing, storage and protection. Their standard 19″ width make them compatible to standard optical distribution frame with 19” width. And it also can be used alone

Sliding type Rack mounted fiber optic patch panel Features the shell is high intensified & insulated material, thus having excellent mechanic performance

Fiber input: 4

Adapters output: 12core or 24 core or 48 core

Suitable for different adapter (SC simplex, SC duplex, LC duplex, ST simplex, FC simplex)
The slide out style can be with changeable adapter plate, 4ports and 8 ports are available.
A completed patch panel will be with adapter, pigtail and accessories like fiber tray,
fiber winding wheel, protection sleeve, nylon tie, and snake like tube. Please confirm which type if you want adapter and pigtail with the patch panel

The slide out and rotate out type is flexible on open and convenient for operations
Accessories like fiber tray, fiber winding wheel, protection sleeve, nylon tie, and snake like tube can be ordered separately. Cable input is with rubber dust cover. The cable entries are big enough for most of cable with different diameters

Features

Every fiber adapter option is supported. They are fully customizable and feature patch and cabling compartments, removable front and rear doors for easy cable access and integrated front and rear cable management. Series rack mount panels are available in 1U, 2U, and 4U rack heights that can accommodate 6 to 288 fibers

Fiber routing system

In Data Centre or Cable room environments it is best practice to segregate fiber optic cabling from all copper services. Utilizing an enclosed fiber ducting containment system clearly defines the fiber optic cables by means of distinctive yellow containment, providing protection against compression and ensuring the minimum bend radius of the fiber cables is never exceeded

We can also provide a full range of colors to enable a containment system in line with corporate color schemes. Faranir have installed thousands of meters of fiber and copper cabling ducting systems both above data cabinets and underfloor. We are certified installers of both Panduit and Warren & Brown Solutions.We also install full basket tray containment, powder coated with bespoke color and inlay matting if required

The first in a series of revolutionary components, the Fiber Raceway Outlet (FRO) is simply and easily placed over the sidewall of any new or existing channel to create a vertical drop-off from a horizontal run. With full radius control, the fiber outlet safely routes fibers to and from equipment bays or distribution frames

Unlike most other products, the low-profile, fiber outlet is truly installed with no tools, not even a screwdriver! With only a 50mm profile above the channel’s edge, it can be placed anywhere along the sidewall of straight channels. The differences don’t stop there. The outlet and its accessories has been created using flame-retardant engineered plastics that not only meets the Bell core NEBS specification, but also meets the zero-halogen requirements of the European community. All of which makes it a true worldwide solution

The outlet has a unique two-piece cover with a hinged rear portion that allows users to access express fibers that bypass the outlet, without having to remove the main cover. So express fibers can be added, moved or changed without ever disturbing the fibers inside the outlet